Camera Recording Storage Calculator
Estimate CCTV, NVR and recording storage from camera count, bitrate and retention time, with continuous or motion-triggered recording.
Estimated capacity including allowance
6.22 TB
- Recorded video storage
- 5.18 TB
- Combined camera network bitrate
- 16 Mbps
Estimates use decimal MB, GB and TB. Actual files vary with variable bitrate, container overhead and encoder settings.
Compare your plan with your actual connection speed.
Run speed testHow much storage do cameras need?
Four cameras recording at 4 Mbps each, 24 hours per day, for 30 days produce about 5.18 TB of video. A 20% additional capacity allowance brings that to about 6.22 TB before redundancy and filesystem use. Use your camera’s actual average encoded bitrate for the most useful estimate.
Continuous versus motion recording
Motion recording reduces saved footage only when little movement occurs. The recording percentage is your assumption about time actually saved; busy scenes, rain and pre-event buffers can increase it. Peak network load is still the sum of all camera bitrates, so do not size a switch using the reduced storage duty percentage.
Local bandwidth is not internet bandwidth
Camera-to-NVR traffic normally stays on your local network. Remote viewing and cloud recording may require internet upload, depending on how many streams are sent and whether substreams are used. RAID, disk formatting, metadata and audio can increase required capacity; include audio in the per-camera bitrate and allow for your recorder’s configuration.
For a single recording, use the video file size calculator. For internet upload stability, use the livestream monitor.